does not support TXT."
4.2.26.8 UEFI0045 : "Unable to enable the TXT feature because a TPM chip is not present."
4.2.26.9 UEFI0059 : "The Power Supply Units (PSUs) in the system do not match."
4.2.26.10 UEFI0060 : "Power required by the system exceeds the power supplied by the
Power Supply Units (PSUs)."
4.2.26.11 UEFI0068 : "The mezzanine card configuration used is not supported on this
Chassis."
4.2.26.12 UEFI0071 : "One or more UEFI network interfaces is not available. The
corresponding UEFI network devices are disabled."
4.2.26.13 UEFI0072 : "Unable to load the firmware from <device name> because of the
Secure Boot policy."
When event is generated, message will have the following substitutions:
• <device name> = "Integrated NIC 1 Port 2 partion 1"
4.2.26.14 UEFI0073 : "Unable to boot <Boot Option name> because of the Secure Boot
policy."
When event is generated, message will have the following substitutions:
• <Boot Option name> = "Disk connected to USB Front Port 1: Datastick Pro"
4.2.26.15 UEFI0074 : "The Secure Boot policy has been modified since the last time the
system was started."
4.2.26.16 UEFI0075 : "Network Daughter Card 1 is not detected."
4.2.26.17 UEFI0081 : "Memory size has changed from the last time the system was started."
4.2.26.18 UEFI0086 : "Unsupported Small Outline Dual In-line Memory Module (SODIMM)
memory is installed on RDIMM memory slot: <slot number>."
When event is generated, message will have the following substitutions:
• <slot number> = "A1"
4.2.26.19 UEFI0087 : "Unsupported 4Gb technology DIMM module is installed on memory
slot: <slot number>."
When event is generated, message will have the following substitutions:
• <slot number> = "B2"
4.2.26.20 UEFI0088 : "Unsupported 8Gb technology DIMM module is installed on memory
slot: <slot number>."
When event is generated, message will have the following substitutions:
777
Comentários a estes Manuais