4.1.14.8 PSU8508 : "<error string>, PSU<slot number> firmware update is in progress."
When event is generated, message will have the following substitutions:
• <error string> = ""
4.1.14.9 PSU8510 : "PSU in slot <slot number> FW updated successfully to version <version
number>"
When event is generated, message will have the following substitutions:
• <slot number> = ""
4.1.14.10 PSU8511 : "Successfully updated the firmware for the PSU in slot <slot number>."
When event is generated, message will have the following substitutions:
• <slot number> = ""
4.1.14.11 PSU8512 : "Unable to update the firmware for the PSU in slot <slot number>.
Error=0x<error number> (<error string>)"
When event is generated, message will have the following substitutions:
• <slot number> = ""
4.1.14.12 PSU8513 : "Unable to complete the PSU slot <number> firmware update.
Error=0x<error number>."
When event is generated, message will have the following substitutions:
• <number> = ""
4.1.14.13 PSU8515 : "Unable to set the Enable Dynamic Power Supply Engagement attribute."
4.1.14.14 PSU8516 : "Unable to set redundancy policy because PSU enumeration is in
progress."
4.1.14.15 PSU8517 : "PSU redundancy policy changed."
4.1.14.16 PSU8518 : "Unable to access the PSU <slot number> FRU data."
When event is generated, message will have the following substitutions:
• <slot number> = ""
4.1.14.17 PSU8519 : "Enhanced Dynamic Power Supply Engagement (DPSE) is not supported
by the current power supply configuration and is suspended."
4.1.14.18 PSU8520 : "Enhanced Dynamic Power Supply Engagement (DPSE) is fully
supported."
4.1.14.19 PSU8521 : "PSU <slotnum> exceeded upper temperature threshold and has been
turned off."
When event is generated, message will have the following substitutions:
702
Comentários a estes Manuais