Virtual Console FCD-CFxx Informações Técnicas Página 189

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 920
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 188
2.3.5.8 ENC8 : "The <Enclosure Name> alarm was disabled."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.9 ENC9 : "The <Enclosure Name> asset tag was changed."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.10 ENC10 : "The <Enclosure Name> asset name was changed."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.11 ENC11 : "The <enclosure name> service tag was changed."
When event is generated, message will have the following substitutions:
<enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.12 ENC12 : "Communication resumed on <Enclosure Name>."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.13 ENC13 : "Unsupported configuration detected on <Enclosure Name>. <EMM0 1>
<EMM1 2>"
When event is generated, message will have the following substitutions:
<Enclosure Name> = "not implemented"
<EMM0 1> = "not implemented"
<EMM1 2> = " not implemented"
2.3.5.14 ENC14 : "The number of enclosures connected on <controller name> has exceeded
the maximum limit supported by the controller."
When event is generated, message will have the following substitutions:
<controller name> = "port 0 of Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.15 ENC15 : "An enclosure blink operation has initiated on <Enclosure Name>."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
2.3.5.16 ENC16 : "An enclosure blink has ceased on <Enclosure Name>."
When event is generated, message will have the following substitutions:
189
Vista de página 188
1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 919 920

Comentários a estes Manuais

Sem comentários